Welcome new user! You can search existing questions and answers without registering, but please register to post new questions and receive answers. Note that due to large amounts of spam attempts, your first three posts will be manually moderated, so please be patient.
We have moved to a new forum at http://jevois.usc.edu, please check it out. The forum at jevois.org/qa will not allow new user registrations but is maintained alive for its useful past questions and answers.

Can the camera connector be extended?

0 votes
I would like to utilise the JeVois device with the camera extended about 15cm away from the rest of the unit. Is there a camera with a longer connector, or is it possible to extend the one which comes with the device at all?
asked Jul 22, 2018 in Hardware Questions by Liamch (160 points)

1 Answer

+1 vote
Best answer
The camera sensor uses a 24-pin 0.5mm pitch FFC cable (flat flex cable). We have not found modules with a longer cable, but extensions seem to be available. Look for those specs on google. For example this one:


You would connect the sensor to that little PCB, then the provided longer cable to the PCB too, and the other end of the longer cable goes to the connector on the JeVois PCB.
answered Jul 23, 2018 by JeVois (46,580 points)
selected Jul 23, 2018 by Liamch
This is perfect, thank you!