JeVois  1.20
JeVois Smart Embedded Machine Vision Toolkit
Share this page:
Hardware: Schematics, case STL files, etc

Table of Contents

JeVois-A33 Schematics

JeVois-A33 Plastic case STL files

Note that those do not print well with filament-based 3D printers. They print ok with laser sintering printers, though you may lose many of the details in the extruded logos.

Standard case

Fanless case

This case was designed for a heatsink with 30x20mm footprint. Note that in our tests, a 30x20x6mm heatsink is too small to provide adequate cooling. JeVois overheats over immediately under load. This is why we decided to use a fan for production. See JeVois-A33 fanless operation for more information on fanless mods.

Case for modified units with AR0135 global shutter sensor

JeVois-Pro Schematics

JeVois-Pro Plastic case STL files

Note that those do not print well with filament-based 3D printers. They print ok with laser sintering printers, though you may lose many of the details in the extruded logos.

Standard case