JeVois Tutorials  1.20
JeVois Smart Embedded Machine Vision Tutorials
Share this page:
Getting started with using the JeVois smart camera

To use your JeVois camera, follow the instructions at JeVois Start.

Note
Note that since June 2018 it may be easier to use JeVois-A33: JeVois Inventor graphical user interface. The instructions below do not require JeVois Inventor are are provided in case you do not want to use the Inventor.

Things to do in this tutorial:

  • Get your JeVois smart camera connected and working. Follow instructions here:
  • Try the different machine vision modules listed in the demos section of JeVois Start: For each module, select its video resolution in your video capture software, then click on its name in the demos section of JeVois Start to see some explanations of what it can do and to try it out with some sample images from the web or some objects that you have. For example:
    • Select YUYV 640x360 @ 30.0 fps in your video capture software and check out JeVoisIntro. Follow the on-screen directions and see the videos below.
    • Select YUYV 320x286 @ 30.0 fps in your video capture software and show some QR-codes to your JeVois smart camera. For examples, see DemoQRcode and click on the small QR codes in there to display them bigger, then point your JeVois smart camera towards them.
    • Select YUYV 320x260 @ 30.0 fps in your video capture software and show some ArUco markers to your JeVois smart camera. For examples, see DemoArUco and click on the small ArUco codes in there to display them bigger, then point your JeVois smart camera towards them.
    • And so on. Just go down the list in the demos section of JeVois Start and try things out.
  • See the videos below where we play with some of these machine vision modules out of the box.